
(USB / BLE dual interfaces, GPS and QZSS multiple constellations, Windows, Android and IOS compatible)
Compared to the GT-120 GPS, GT-120B is now a GNSS. It supports both GPS and QZSS constellations. It has Indoor and outdoor multi-path detection and compensation which dramatically eliminates Ionospheric error and multi-path effects. Data accuracy is getting improved.
GT-120B has usb and BLE dual interfaces. Data can be downloaded via either usb or BLE. Instead of the proprietary USB cable for GT-120, GT-120B now uses a standard micros-usb cable.
GT-120B can be used as an usb GNSS receiver with 1-10Hz update rates. When used as a GNSS data logger, the update rate is 1 Hz.
Battery runtime by GPS log interval
GPS log interval |
Battery runtime |
1 sec |
|
5 sec |
15hr |
10 sec |
25hr |
15 sec |
60hr |
30 sec |
120hr |
60 sec |
180hr |
60 min |
2 months |
Logging configuration options
Configurable GPS Logging interval |
1sec~60min59sec |
Circullar Logging |
YES |
POI |
YES |
Scheduled Logging |
YES |
Merge scheduled waypoints |
YES |
Smart Tracking |
YES |
Power triggered auto-logging |
YES |
Technical Spec:
Dimension |
44.5x28.5x13.8mm |
Weight |
21.5g |
BLE(Bluetooth Low Energy) |
Yes |
BLE Chipset |
Nordic nRF 52820 |
BLE range |
20m |
GPS Chipset |
MTK MT3337 |
Antenna |
Patch Antenna |
Channels
|
22 tracking / 66 acquisition-channel GPS receiver; Supports up to 210 PRN channels; |
GNSS support |
GPS & QZSS |
SBAS support |
WAAS/EGNOS/MSAS/GAGAN |
Other enhancement
|
12 multi-tone active interference cancellers (with ISSCC2011 award); Indoor and outdoor multi-path detection and compensation; Internal real-time clock (RTC); |
RTCM ready |
YES |
NEMA support |
NMEA 0183 standard V3.01 and backward compliance. Supports 219 different data |
update rates for position |
10 Hz |
GPS Sensitivity |
Acquisition: -148 dBm (cold) / -163 dBm(hot) Tracking: -165 dBm |
Cold Start |
< 35sec |
Warm Start |
< 34sec |
Hot Start |
<1 sec |
USB cable |
micro-usb, USB 2.0 |
Battery |
380mAh |
LED |
Blue & Red |
Operating Temperature |
-10 ~ +50°C |
Water-resist |
YES |
GPS Logger |
YES |
GPS Receiver |
USB |
Memory |
65000 |
Motion Detection |
NO |
Disable Button |
YES |
Disable BLE |
YES |
Disable LED flashing |
YES |
Setup BLE download password |
YES |
Enable BLE upon schedule |
YES |
Configure BLE broadcast interval |
YES |
Broadcast latest GPS position |
YES |
Configure BLE TX Power (output power of BLE signal) |
YES |
Rename device (such as nickname) |
YES |
Power Saving Option above 7sec |
NO |
Firmware update |
via PC software |
Device configuration |
via USB or BLE |
Data download |
via USB or BLE |
Combined maps |
YES |
GPS Data Import format |
GPX |
GPS Data Export format |
GPX, CSV |
Software and compatibility:
GT-120B comes with below software:
- Windows App: compatible with Windows 7, 8, 10 & 10
- IOS App: compatible with IOS 12 and above
- Android App: compatible with Android 7 and above
“I-gotU GPS” IOS / Android apps:

Instead of connecting through a USB cable, now you could wirelessly change configuration settings of GT-120B through iphone/Android.
You could download the log data from GT-120B to your smartphone without physically hooking up a cable.
There is no display on the GT-120B device. Open your “i-gotU GPS” app, the status of the battery and memory are shown there.

The new “I-gotU GPS” Windows software(will be available in Aug, 2022) has the below new features:
- playback group movement
- measure distance from waypoint A to B.
- measure distance from different anchor points.
Package content:
1 x GPS logger;
1 x USB cable;
(GT-120B does NOT comes with Jelly case or fastening strap.)